Canon VIXIA HV40 Instruction Manual page 98

Hd camcorder
Hide thumbs Also See for VIXIA HV40:
Table of Contents

Advertisement

Do's and Don'ts oo_
the slot if it is not correctly odented may
damage the memory card or the
camcorder.
• Do not attach any labels or stickers on
the memory card.
• When you erase image files or initialize
the memory card, only the file allocation
table is altered and the data itself is not
actually deleted. Take the necessary
precautions when you dispose of the
memory card, for example by physically
damaging it to prevent the leakage of
private data.
Lithium Butten Battery
WARNING!
, The battery
used in this device
may
present
a fire or chemical
burn hazard
if
mishandled.
, Do not disassemble,
modify, immerse
in
water,
heat above
100 °C (212 °F) or
incinerate
the battery.
, Replace
wkh a CR2025
battery made by
Panasonic,
Hitachi
Maxell, Sony, Sanyo,
or with Duracel!2025.
Use of other
batteries
may present
a risk of fire or
exp!osion.
, Do not insert the battery into the mouth,
if
swallowed,
seek medical
assistance
immediately.
The battery case may break
and the battery fluids may cause
internal
injuries_
, Keep the battery
out of the reach of
children.
, Do not recharge,
short-circuit
or insert the
battery
in the wrong direction.
, Dispose
of the used battery
according
to
applicable
recycling
regulations.
• Do not pick up the battery using
tweezers or other metal tools, as this will
cause a short circuit.
• Wipe the battery with a clean dry cloth
to ensure proper contact.
• Fer California_USA enly: The lithium
battery included contains Perchlorate
Material - special handling may apply.
See www.dtsc.ca.qovihaza
rdouswastet
perchlorate for details.
Builtoin BechargeaMe
Lithium Battery
The camcorder has a built-in
rechargeable
lithium battery to keep the
dateltime and other settings. The built-in
lithium battery is recharged while you use
the camcorder, however, it will become
totally discharged
if you do not use the
camcorder for about 3 months.
To recharge the built-inlithium battery;
Connect the compact power adapter to
the camcorder and leave it connected
for
24 hours with the _
switch set to
_:_ (CHG).

Advertisement

Table of Contents
loading

Table of Contents