Canon VIXIA HV40 Instruction Manual page 43

•o_o M enu Options Lists
IWTYPE *_ [
[[_ NORMAL TV], [_ WiDE TV]
In order to display the picture in full and in
the correct aspect ratio, select the setting
according to the type of television to
which you wiii connect the camcorder=
[_] NORMAL TV]: TV sets with 4:3
aspect ratio.
[_ WIDE TV]: TV sets with 16:9
aspect ratio.
• This setting wiii be unavailable while
the camcorder is connected to an
external device using the HDMI cable=
I OUTPUT CH [_-j_ [
[_+C3 L/R], [_ LfL], [_ RIR]
You can select the audio channel to use
dudng the playback of a tape with audio
recorded on two channels.
[moo3 L/R]: Left and Right channels
(stereo) / Main + Sub tracks (bifingual)=
[W L/L]: Left channel only (stereo) / Main
track only (bilingual)=
[C3 RiR]: Right channel only (stereo) /
Sub track only (bifinguai)=
l AUDIO OUT ?_
[ST-1 STEREO1], [ST-2 STEREO2],
[1:1 MIX/FIXED], [_ MIXiVAR=]
You can select the audio track to use
during the playback of a tape with audio
dubbed over the recording.
[ST4 STEREO1]: Original sound only=
[STy2STEREO2]: Dubbed audio only=
[ 1:1 MIX/FIXED]: Mixed audio with the
original sound and dubbed audio at the
same level
[_ MIXtVAR=]: Mixed audio where the
balance between the original sound (ST4)
and the dubbed audio (STy2)can be
adjusted.
MINX BALANCE _-_--"P I
ST4" " "STy2
When [AUDIO OUT] is set to [[_J MIX/
VAR=], adjust (_) the sound balance
with the joystick.
• The camcorder wiii retain the audio
balance adjustment; however if you turn
offthe camcorder, [AUDIO OUT] wiii be
reset to [ST4 STEREO1]=
AVIPHONES
_ I ([Z3 32)
[_ AV], [_ PHONES]
[ PHON£$VOLo
-._.m®m®||m|H|_
When [AViPHONES] is set to
[_ PHONES], adjust (_) the volume
of the headphones with the joystick.
* In mode, adjust the volume
using the joystick guide (EC; 33).
[COMROUT _1
[_ 480i], [_ !080_/480_]
You can select the video specifications to
use when connecting the camcorder to a
high-definition TV using the video
component connection.
<
o