Listing Capacity Open - TEC MA-516-100 SERIES Owner's Manual

Example 2) Department Quantity Extension sequence:
.......
@/FOR
Quantity
PR
Depress or
OPEN
Please note that the entry sequence is the same as that of Open-price Departments, except that the [PR OPEN]
(or [OPEN]) key is additionally depressed and a Preset-price Department Key is operated instead of an Open-
price Department.

Listing Capacity Open

As for setting LCs, see "Programming Department LCs" in the "Department Keys" section on page 43.
When an item entry price exceeds the LC in sale entries, an error will result. To enter a price larger than the limit defined
by the LC, use the [LC OPEN] or [OPEN] key.
LC
Depress prior to or any time during the entry sequence of the following operations for Open-price
OPEN
Departments and PLUs already described:
Entry of One Department Item
Department Repeat Entry
Other Income Department
Department Quantity Extension
Department SPP
Single-item Department Entry
Entry of One PLU Item
PLU Repeat Entry
PLU Quantity Extension
Single-item PLU Entry
Please note that the [LC OPEN] or [OPEN] key must be pressed, at the latest, before the final key of the required
Department or PLU entry sequence. The LC for the Department or PLU will be extended with two higher digits for
that entry only. (If a price of further high digits must be entered, call for Manager Intervention. Refer to Chapter 19
on page 96.)
Example 1) Department Quantity Extension sequence:
.......
@/FOR
Quantity
LC
Depress or
OPEN
Preset-price Dept.
.......
Unit Price
OPEN
at any of these positions.
LC
(Listing Capacity Open Key)
OPEN
NOTE: When [OPEN] key is used instead of [LC OPEN],
(NOTE)
(NOTE)
.......
Unit Price
OPEN
at any of these positions.
- 60 -
Dept.
Final Key of the
sequence
OPEN
Repeat Entry is not possible (because the [PR
OPEN] key function also becomes effective).
Dept.
Final Key of the
sequence
EO1-11116
MA-516-100 SERIES
(Open Key)