TEC MA-516-100 SERIES Owner's Manual page 110

Zone PLU Sales Reset (Z) Report
Use MA Key.
X
MGR
-
REG
OFF
Z
SET
The Start PLU Code must be equal to or smaller
than the End PLU Code. When equal, the data
of only one PLU is read.
NOTE: If this reset report is necessary, it must be taken
before the "All PLU Reset Report" (i.e., all the PLUs
sales data are reset by All PLU Reset).
Periodical Read Reports:
Periodical Financial Read (X) Report
Use MGR or MA Key.
X
MGR
-
REG
OFF
Z
SET
Periodical All Cashier Read (X) Report
(regardless of any Cashier Identifying method; Signed-OFF condition is required for
Signing Method)
Use MGR or MA Key.
X
MGR
-
REG
OFF
Z
SET
@/FOR
PLU Code that starts the
required zone (range) for
this report (max. 3 digits).
AT/TL
2 0
"20" is fixed for
Periodical Financial
Read.
The drawer opens
4 AT/TL
"4" is fixed for Peri-
odical All Cashier
Read.
If an error occurs:
· Is the register signed-
OFF?
- 106 -
PLU
PLU Code that
ends the zone
(max. 3 digits).
The drawer does not open.
Report
See page 115 for
Print
sample format.
Starts
Sales data of the PLUs of the codes in
the range of the designated zone.
(PLUs with zero sales data are skipped.)
The drawer opens
&
Report
See page 108 for
Print
sample format.
Starts
Department Sales Data & Financial Sales
Data for the period
&
Report
See page 113 for
Print
sample format.
Starts
Sales data recorded for Periodical All Cashier Read.
(Cashiers with zero sales data are not printed but their cashier codes.)
EO1-11116
MA-516-100 SERIES