TEC MA-516-100 SERIES Owner's Manual page 62

Receipt Print Format for PLU SPP
Whole Package Quantity
PLU Code
NOTES 1. The product (final result amount) obtained by SPP cannot be repeated.
2. The product must not exceed 7 digits.
3. The rounding process of the fractions of the product is ROUND UP PRODUCT as initial
status. It can be changed to ROUND UP ITEM PRICE (refer to Chapter 22, System Option
Address 2 - Bit 5 on page 120.)
4. PLU SPP is possible only using the PLUs of SPP Type (i.e. programmed with Whole
Package Quantity).
Single-item PLU Entry:
If a Department Key is programmed with Single-item status, an entry through a PLU which links to the Department
immediately finalizes the sale as cash and issues a receipt without operating a media key (just as the operation
using a Single-item Department Key).
Such PLUs are operated in the same way as ordinary (itemized) PLUs already described, except that Repeat
Entry is not possible using Single-item PLUs.
NOTES 1. An item entry through such a PLU will automatically finalize the sale as cash outside a sale
(i.e. when no other items have been entered within one receipt sequence). However, it will
function just as an Itemized PLU if operated inside a sale.
2. Quantity Extension and SPP are also possible using Single-item PLUs.
Receipt Print Format for Single-item PLU Entries
Example 1) -- Entry outside a sale --
When no sale is under way, a PLU item (PLU
Code 101, Preset Price $3.40, Iinking to a
Single-item and Non-taxable department) is
entered. The sale is automatically finalized as
cash and a receipt is issued.
1 0 1
PLU
- 58 -
EO1-11116
MA-516-100 SERIES
Whole Package Price
Purchased Quantity
Product