Table of Contents
Advertisement
27
Post Alarm (MOTION) – Allows you to record video after Motion has stopped for a specified period of time.
10
This option will only work for cameras set to record using Motion Detection
Pre-Alarm – Allows you to record a section of video just prior to Motion or Sensor activation.
11
4.3.1
Creating a Motion Area
Creating a Motion Area
1)
Place the mouse pointer at the upper left hand corner of the
area you want to designate, press and hold down the left
mouse button, drag the mouse. Let go of the button when the
Motion Area is the size you want it to be.
2)
Continue creating as many Motion Areas as you wish (up to 5).
You can resize them and move them by dragging the sides and
corners of the Motion Area.
4.3.2
Activating an Alarm Output on a Motion Event
Enabling Alarm Output on a Motion Event
1)
From the Motion Setup window, select a camera to edit.
2)
Configure the camera for Motion.
3)
Check the Alarm Output box.
4)
Select a Control Output to activate for the selected camera.
5)
Select the duration you wish the Control Output to be activated
for. When a Motion event occurs.
Figure 4.3.1
Figure 4.3.2
Advertisement
Table of Contents
