65
6.3
PTZ Setup
The PTZ Setup allows you to enable PTZ cameras, create Presets, Tours, and also adjust speed settings. Many
options listed here are features only available on selected cameras.
1
8
10
9
11
Figure 6.3
1
RS485 / RS232 – Defines how to send the PTZ signal to the camera.
Select Camera – Selects the current camera to be edited.
2
3
Protocol – Selects the protocol to use for the selected camera. The protocol is the unique set of instructions
that allows the DVR to communicate with the PTZ camera.
4
Enable Pan/Tilt – Enables the DVR to control the PTZ camera.
5
Open PTZ Controller – This option opens the PTZ controller allowing you to move the PTZ camera.
6
On Screen Compass – This option allows on-screen PTZ Control. This allows you to move the PTZ camera by
simply clicking on the video itself instead of using the controller.
7
Preset and Tour – These options allow you to create Presets and Tours for the PTZ camera. Since each
camera creates these in a different way, there can be multiple ways to do this.
8
Pan Speed – This option increases or decreases the Pan speed.
2
4
3
12
5
7
6
13
Figure 6.3
PTZ Setup