Table of Contents
Advertisement
To display the ADMIN menu, see "1.ENTERING TO ADMIN MENU".
2
Press the [IPv6] button.
• The IPv6 screen is displayed.
3
Specify the following items as required.
• IPv6 PROTOCOL—Press the [ENABLE] button to enable the IPv6 protocol, or [DISABLE] button to disable
the IPV6 protocol.
• LLMNR—Press the [ENABLE] button to enable the LLMNR (Linklocal Multicast Name Resolution) protocol, or
[DISABLE] button to disable the LLMNR protocol.
• ADDRESS MODE—Select the [MANUAL] button.
• Link Local Address—The unique address used for the IPv6 is displayed.
• Link Local Address cannot be connected to another routed IPv6 network.
• The [ENABLE] and [DISABLE] buttons for the LLMNR protocol are available when you select the [ENABLE]
button for the IPv6 protocol.
4
Press the [Next] button.
• IPv6 (Manual/Stateful Address) screen is displayed.
P.91
4
117
Advertisement
Table of Contents
