Epson 400 User Manual page 97

The printer loads more than one sheet at a time.
Cause
Too many sheets are loaded
in the sheet feeder.
The edge guides are not set
correctly.
The paper is too thin.
Ejected paper is wrinkled.
Cause
The paper is too thin or damp. Do not store your paper in a damp or
Paper does not fully eject.
Cause
The paper is too long.
6-14
Troubleshooting
What to do
Take the paper stack out of the feeder,
remove some sheets, and reload the
stack. Load paper only up to the arrow
mark on the left edge guide.
Adjust the guides against the stack of
paper. See "Loading Paper" in
Chapter 2.
Make sure the paper meets the paper
requirements for this printer. See
"Paper" in Appendix B.
What to do
humid environment. Store paper in its
original packaging.
What to do
-
Press the load/eject button to eject
the paper. Use paper that meets the
paper requirements for this printer.
See "Paper" in Appendix B.