Epson 400 User Manual page 80

6. Remove the ink cartridge from its protective bag. Next,
remove only the yellow tape seal from the cartridge as
shown below.
black S020093
c
Caution:
You must remove the yellow tape seal from the
cartridge. Leaving the tape on when you install the
cartridge will permanently damage it.
Do not remove the whole tape seal (especially the
white portion) from the top of the cartridge. Remove
only the yellow portion.
Do not remove the tape seal from the bottom of the
cartridge; otherwise, ink will leak.
7. Lower the ink cartridge into the cartridge holder with
the label on the cartridge face up and the arrow on the
cartridge pointing to the rear of the printer. The larger
(color) cartridge goes on the right, the black ink cartridge
on the left.
color S020089
Maintenance and Transportation
5
5-5