Replacing Consumable Products; Replacing A Developer Cartridge - Epson 4012364-00 Quick Reference

Replacing Consumable Products

You need to replace the following consumable products
when a notice message is displayed on the LCD panel
or the window of the EPSON Status Monitor 3 utility.
Developer Cartridge (Black)
Developer Cartridge (Yellow)
Developer Cartridge (Magenta)
Developer Cartridge (Cyan)
Photoconductor Kit
(includes a photoconductor unit,
a waste toner collector, and a
print head filter)
Fuser Kit
(includes a fuser unit and a
second transfer roll)
Fuser Oil Roll
Waste Toner Collector
Transfer Belt Unit
This guide contains replacement procedures for the
developer cartridges and the photoconductor kit only.
See the Reference Guide for information on replacing the
fuser kit, fuser oil roll, waste toner collector, and
transfer belt unit.

Replacing a developer cartridge

S050033
S050034
S050035
S050036
S051072
S05300
S052003
S050037
S053001
w
Warning:
Do not dispose of used developer cartridges in
fire, as they may explode and cause injury.
Dispose of them according to local regulations.
Do not touch the toner and avoid all contact
with your eyes. If toner gets on your skin or
clothes, wash it off with soap and water
immediately.
Follow these steps to replace a developer cartridge:
1. Confirm the color of the developer cartridge that
needs to be replaced by checking the LCD panel.
2. Open the front cover.
2 2 2 2