Table of Contents
Advertisement
Reverse channel
Transmission mode
Adaptable
connector
Synchronization
Handshaking
Signal level
Data transmission
timing
USB interface
The EPSON Stylus Scan's built-in USB interface is based on the
standards specified in the Universal Serial Bus Specifications
Revision 1.0 and the Universal Serial Bus Device Class Definition
for Printing Devices Version 1.0. This interface has the following
characteristics.
Standard
Bit rate
Data encoding
Adaptable
connector
Recommended
cable length
Optional USB Cable
The specifications below apply to the optional USB cable
(C83623 ).
IEEE-1284 Nibble mode,
IEEE-1284 ECP mode
57-30360 Amphenol connector or equivalent
See the IEEE-1284 specification
See the IEEE-1284 specification
IEEE-1284 Level 1 device
See the IEEE-1284 specification
Based on Universal Serial Bus Specifications
Revision 1.0, Universal Serial Bus Device Class
Definition for Printing Devices Version 1.0
12 Mbps (full speed device)
NRZI
USB Series B
2 meters
Product Specifications
B-13
Advertisement
Table of Contents
