Table of Contents
Advertisement
2. Access the printer software. If you need instructions, see
"Accessing the printer software" on page 4-2.
3. Click the Utility tab in the printer software, then click the Head
Cleaning button.
4. Follow the on-screen instructions.
The P power light flashes while the EPSON Stylus Scan
performs the cleaning cycle. The cycle takes about one minute
to complete.
c
Caution:
Never turn off the EPSON Stylus Scan while the P power
light is flashing. Doing so may damage the Stylus Scan.
5. When the P power light stops flashing, click Print nozzle
check pattern in the Head Cleaning dialog box to confirm
that the head is clean and to reset the cleaning cycle.
11-6
Maintenance
Advertisement
Table of Contents
