Table of Contents
Advertisement
Below are sample printouts:
Good sample
Print head needs to be cleaned
The above sample is in black and white, but the actual test prints in color
(CMYK)
In the check pattern, if you find that any segments are missing
from the test lines, you may need to repeat the head cleaning and
print the nozzle check pattern again.
If print quality does not improve after repeating this procedure
four or five times, turn the Stylus Scan off and leave it off
overnight. Then do the head cleaning again.
If the print quality still has not improve, one or both of your ink
cartridges may be old or damaged and may need to be replaced.
To replace an ink cartridge before it is empty, see "Replacing an
Old or Damaged Ink Cartridge" on page 10-11.
If print quality remains a problem after replacing the ink
cartridges, contact your dealer.
segments are missing
Maintenance
11-7
Advertisement
Table of Contents
