4. Push back the release tabs and lift up the clamp that holds the
cartridge you want to replace as far as it will go. The cartridge
rises partly out of the cartridge holder.Then lift the cartridge
out of the Stylus Scan and dispose of it properly. Do not take
the used cartridge apart or try to refill it.
w
Warning:
If ink gets on your hands, wash them thoroughly with soap
and water. If ink gets into your eyes, flush them immediately
with water.
c
Caution:
Once you open the ink cartridge clamp, the ink cartridge
becomes unusable and cannot be reinstalled, even if ink
remains.
5. Remove your new black ink cartridge from its protective bag.
Then remove the yellow tape seal from the cartridge.
10-8
Replacing Ink Cartridges
black ink cartridge (S020189)