Table of Contents
Advertisement
1. Make sure the Stylus Scan is on. The P power light should be
on, but not flashing.
2. Lower the output tray at the front of the EPSON Stylus Scan,
then open the front cover.
3. Hold down the
release it. The print head moves to the cartridge replacement
position for the black ink cartridge. The P power light begins
flashing.
c
Caution:
Do not move the print head by hand, as this may damage the
mechanism.
R
cleaning button for three seconds, then
Replacing Ink Cartridges
10-7
Advertisement
Table of Contents
