Lexmark T652 Service Manual page 80

4062
Error
code or
message
242.18
242.19
242.52
242.33
242.34
242.35
242.36
242.37
2-46
Service Manual
Error contents
Pick retry timeout
Source = Tray 2
Pick retry timeout
Source = Tray 2
Tray 2 pick motor
overrun failure
Source = Tray 2
Tray 2 not ready
Source = Tray 2
Empty tray pick
attempted
Source = Tray 2
Pick page received
while POR not yet
done.
Source = Tray 2
Sensor (pass through)
static jam
Source = Tray 2
Sensor (pass through)
late jam
Source = Tray 2
Description/Action
The engine timed out waiting
for the tray 2 to report ready
before the first pick attempt.
The engine timed out waiting
for the tray 2 to report ready
before a pick retry attempt.
The Pick motor encoder
continues to detect pulses after
the motor was turned off.
Tray was not properly pushed
into the machine.
The pick arm attempted to pick
with no media in the tray.
Media remains on the sensor
(input) during the warm up
sequence.
Media remains on the sensor
(input) during the warm up
sequence.
The media is late reaching the
sensor (pass through) within
the specified time.
Possible repair actions
Turn the machine off/on.
Turn the machine off/on.
1. Check all connections on
the pick arm assembly.
2. Check all connections on
the system card assembly.
3. Replace the pick arm
assembly if problem
remains. Go to "Operator
panel door assembly
removal (models X651,
X652, X654, and X656)"
on page 4-49.
1. Check the size sensing
fingers on the media tray
for damage
2. Replace the media tray
assembly if problem
remains.
3. Check the switch (media
size) for proper connection.
4. Replace the switch (media
size) if problem remains.
Go to "Switch (media
size) assembly removal
(T650, T652, T654)" on
page 4-74.
1. Check the media out
actuator for damage.
2. Replace the media out
actuator if problem
"Tray roller
remains. Go to
catch assembly removal
(T650, T652, T654)" on
page 4-81.
Go to sensor (pass through)
static jam service check.
"Sensor (pass through)
See
static jam service check" on
page 2-147.
Go to sensor (pass through)
static jam service check.
See "Sensor (pass through)
static jam service check" on
page 2-147.
Go to sensor (pass through)
late jam service check.
See "Sensor (pass through)
late jam service check" on
page 2-145.