7.
Disconnect the fingerprint reader board cable (2) from the ExpressCard board.
8.
Remove the top cover.
Reverse this procedure to install the top cover.
TouchPad assembly
Description
For use only with computer models equipped with a fingerprint reader (includes a fingerprint reader
board and cable)
For use only with computer models not equipped with a fingerprint reader
Before removing the TouchPad assembly, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC Adapter from the computer.
4.
Remove the battery (see
5.
Remove the following:
a.
Hard drive (see
b.
Optical drive (see
c.
Keyboard (see
d.
Switch cover (see
e.
Display assembly (see
f.
Top cover (see
Battery on page
47).
Hard drive on page
53)
Optical drive on page
Keyboard on page
61)
Switch cover on page
Display assembly on page
Top cover on page
81)
56)
66)
75)
Component replacement procedures
Spare part number
487134-001
487135-001
83