Heat Sink - HP 6730b - Compaq Business Notebook Maintenance And Service Manual

Heat sink

NOTE: The heat sink spare part kits include replacement thermal material.
Description
For use only with HP Compaq 6735b computer models
For use only with HP Compaq 6730b computer models
Before removing the heat sink, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the following components:
a. Keyboard (see
b. Switch cover (see
c. Fan (see
Remove the heat sink:
NOTE: Steps 1 through 4 apply only to HP Compaq 6730b computer models. See steps 5 through 8
for removing the heat sink on HP Compaq 6735b computer models.
1. Loosen the two Phillips PM2.0×4.0 captive screws (1) that secure the heat sink clip to the heat
sink.
2. Remove the heat sink clip (2) by sliding it to the right, and then lifting it up.
Battery on page
Keyboard on page
Switch cover on page
Fan on page 68)
47).
61)
66)
Component replacement procedures
Spare part number
488315-001
486289-001
69