Power Button Board - HP 6730b - Compaq Business Notebook Maintenance And Service Manual

Power button board

Description
Power button board (includes cable)
Before removing the power button board, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC Adapter from the computer.
4. Remove the battery (see
5. Remove the keyboard (see
6. Remove the switch cover (see
Remove the power button board:
1. Turn the switch cover upside down, with the front toward you.
2. Remove the three Phillips PM2.0×5.0 screws (1) that secure the power button board to the switch
cover.
3. Remove the power button board (2) from the switch cover.
Reverse this procedure to install the power button board.
Battery on page 47).
Keyboard on page 61).
Switch cover on page
Spare part number
487118-001
66).
Component replacement procedures 67