Product Identity - Stiga PARK SILENT Instructions For Use Manual

8211-0072-80
Hide thumbs Also See for PARK SILENT:
Table of Contents

Advertisement

Available languages

Available languages

covering the valves, the battery should be
replaced.
3 STORAGE
Empty the petrol tank. Start the engine and let it
run until it stops.
Replace the oil while the engine is still warm.
Unscrew the spark plug and pour a tablespoonful
of oil into the cylinder. Rotate the engine a few
turns to that the oil is distributed in the cylinder.
Install the spark plug.
Clean the entire machine. It is particularly
important to clean under the cutting deck. Touch
up paint damage to prevent rust.
Store the machine indoors in a dry place.
Machines with an electric starter:
Remove the battery. Store it well charged in a cool
place (between 0°C and +15°C).
At the correct storage temperature, the battery
should be maintenance-charged every four
months.
The battery acid is extremely corrosive
and can cause injuries and damage to
skin and clothing. Always use rubber
gloves and glasses (goggles) to protect
your eyes. Avoid inhaling any acid
vapour.
Do not incline the battery too much so
that the battery acid can run out onto
hands or clothing. If this should
happen, rinse with plenty of water.
4 SERVICE
Authorised service workshops carry out repairs
and guarantee service. They use original spare
parts.
STIGA original spare parts and accessories are
designed specifically for STIGA machines.
Please note that 'non-original' spare parts and
accessories have not been checked or approved
by STIGA.
The use of such parts and accessories
can affect the function and safety of the
machine. STIGA accepts no
responsibility for damage or injuries
caused by such products.
Original spare parts are supplied by service
workshops and by many dealers.
A list of these can be found on STIGA's Internet
website at: www.stiga.com.
ENGLISH
We recommend that the machine be handed in to
an authorised service workshop for service,
maintenance and checking of the safety devices
once a year.
5 PURCHASE TERMS
A full guarantee is issued against manufacturing
and material defects. The user must carefully fol-
low the instructions given in the enclosed docu-
mentation.
Guarantee period
For consumer use: two years from purchase date.
For professional use: 300 hours or three months,
whichever comes first.
For Stiga Park and Stiga Villa, it is possible to have
a one year extension to the guarantee if the condi-
tions in the service book are satisfied.
For batteries: six months from the purchase date.
Exceptions
The guarantee does not cover damage due to:
- neglect of the user to acquaint himself with ac-
companying documentation
- carelessness
- incorrect and non-permitted use or assembly
- the use of non-genuine spare parts
- the use of accessories not supplied or approved
by Stiga
Neither does the guarantee cover:
- wearing components such as blades, belts,
wheels and cables
- normal wear
- engine and transmission. These are covered by
the appropriate manufacturer's guarantees with
separate terms and conditions.
The purchaser is covered by each country's
national laws. The rights to which the purchaser is
entitled with the support of these laws are not
restricted by this guarantee.

6 PRODUCT IDENTITY

The identity of the product is determined by two
parts:
1. The machine's item and serial numbers:
2. The engine's model, type and serial numbers:
EN
23

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents