Table of Contents
Advertisement
ASSEMBLY INSTRUCTIONS
STEP 5
ANGLE ADJUSTMENT BARS(85)
MAIN FRAME(92)
Attach the
onto the shafts on both sides of the
BOLTS(M8 x 15mm)(62)
WASHERS(M8)(69).
with
and
Do not tighten the bolts until STEP 6.
STEP 6
SUPPORT SLEEVES(84)
ANGLE ADJUSTMENT BARS(85).
Slide one of the
onto the left
Install
SUPPORT SLEEVES(84)
LEFT FRAME(2)
SUPPORT SLEEVE(84)
the
onto the shaft on the
with the
BOLT(M8 x 15mm)(62)
WASHER(M8)
above the shaft as shown in the illustration, and secure with a
and
(69).
PULL PIN(86)
ANGLE ADJUSTMENT BAR(85).
Insert the
into one of the Adjustment Holes in
Repeat on the other side. Tighten all the bolts.
8
Advertisement
Table of Contents
