Lenovo ThinkServer TD100 Installation Manual page 48

v See the User Guide on the ThinkServer Documentation DVD for details about
v The server supports Intel Xeon dual-core or quad-core 1.6 GHz or higher
v Some models support dual-core processors and quad-core processors. Do not
v Read the documentation that comes with the microprocessor to determine
v Obtain an SMP-capable operating system.
v You can use the Configuration/Setup Utility program to determine the specific
To install a microprocessor, complete the following steps:
1. Read the safety information that begins on page vii and "Safety" on page vii.
2. Turn off the server and peripheral devices, and disconnect the power cords and
3. Lay the server on its side; then, remove the left-side cover.
4. Remove the microprocessor air duct from the fan structure. Squeeze the two
5. Remove the microprocessor baffle and the protective film from the second
32
ThinkServer TD100 and TD100x Types 4203, 4204, 4205, 4206, 6398, 6399, 6419, and 6429: Installation Guide
how to install a microprocessor.
microprocessors in each socket. If you are installing two microprocessors, they
must be the same cache size and type, and the same clock speed.
mix dual-core processors and quad-core processors in the same server. Install all
dual-core or all quad-core processors in the server.
whether you must update the basic input/output system (BIOS) code in the
server. To download the most current level of BIOS code for the server, go to
http://www.lenovo.com/support/.
type of microprocessor in the server.
all external cables.
Attention: When you handle static-sensitive devices, take precautions to
avoid damage from static electricity. For details about handling these devices,
see "Handling static-sensitive devices" on page 11.
tabs on the top of the air duct together and lift the air duct out of the server.
microprocessor socket.
1
Microprocessor release lever