Recording; Remote Recording - Digimerge Touch DH200 Series Instruction Manual

RECORDING

You can instantly record live video to your PC using DVR NetView.
NOTE: Recording does not have to be enabled on the DVR for you to record onto your PC.
Figure 28.0 Recording directly to PC
To record live video:
1. From live viewing, select a DVR from the DVR Indicator list at the bottom of the main screen.
2. Click
to your PC. The RECORD button will remain light blue while DVR NetView is recording.
3. Click RECORD again to stop. The RECORD button quickly flashes dark blue to indicate
recording has stopped.
4. By default, files are saved to
click SETUP to open the DVR NetView Setup menu. For more details, see "DVR NetView
Setup" on page 42.
You can playback the recorded video files using Playback Mode in DVR NetView. For more details,
see "Local Playback" on page 53.

Remote Recording

You can start/stop all recording on your system using Remote Setup in DVR NetView. For details,
see "CONTROL" on page 66.
. The system immediately begins recording live video from the selected DVR
C:\Program Files\NetView\Download
. To change the location
49