Oki C5150n Install Manual page 5

Windows TCP/IP Network Installation: Model C5200n
Software
Installing a printer on a network is best handled by
Note:
someone familiar with networks (such as a network
Administrator).
For more detailed information, see the OkiLAN
User's Guide on the Driver CD supplied with your
printer.
Included Network Software
Your Driver CD includes the following network software:
Oki LPR
Supports TCP/IP printing. Creates an OKI Print Port and
installs a pop-up utility to monitor the printer status.
Admin Mgr / Quick Setup Utility
Use this to set up the various computers on your network
for use with the printer.
PrintSuperVision
Provides access to network printer data for monitoring,
reporting and managing networked printers.
Installs on either IIS or PWS Microsoft Web
•
servers.
Job Accounting
Tracks network printer usage by job, user, or Account ID
for internal reports and bill-back purposes.
Network Printer Status
Creates an additional STATUS tab in the printer
Properties dialog box.
Set Up the Network
Print the Menu Map
This will provide information on the printer's IP Address
which is needed to set the printer up on the network.
□
With the printer turned on, press
□
Press .
ENTER
□
Press ENTER .
The MenuMap prints.
□
Look for the IP Address under TCP/IP Configuration.
Run The Admin Mgr / Quick Setup
Utility
□
Insert the Drivers CD supplied with your printer in the
CD-ROM drive. The CD will autorun. (If it doesn't,
click Start → Run → Browse. Browse to your
CD-ROM drive, double-click Install.exe, click OK.)
□
The License Agreement appears, click Next.
□
Select your language.
□
The Menu Installer Software Installation dialog box
appears. Click the Network Software button.
□
Click the Installation/Config button.
□
Click the Admin Mgr / Quick Setup button.
□
The OkiLAN 98100e Softnic Setup Utility dialog box
appears. Select your language.
□
Select from the following buttons:
• Please read before using: Readme file containing
information and instructions for this utility.
OkiLAN 8100e Softnic Standard Setup: if you
•
are experienced in network setup and want access
to all the setting options, click this button and
follow the on-screen instructions for completing
the installation.
OkiLAN 8100e Softnic Quick Setup: This setup
•
is for less experienced users and does not provide
as many setting options as the Standard Setup. To
use Quick Setup, click this button and follow the
steps below.
□
The Welcome dialog box appears. Click Next.
□
If the Ethernet Address information does not
automatically appear, click Search.
□
Click the Ethernet information displayed, then click
Next.
□
Select Yes for TCP/IP protocol and click Next.
5
.
+
(continued on next page)