Oki C5150n Install Manual page 6

Windows TCP/IP Network Installation: Model C5200n
Software (cont.)
□
Select Obtain an IP Address automatically, then click
Next.
□
Select No for NetBEUI protocol, then click Next.
□
Click Execute.
□
Click Finish.
□
Click the Exit button, then click Yes to confirm that you
are exiting the setup utility.
□
Click the Back button. If you are ready to install drivers,
skip to the fourth step under "Install the Driver" below.
Configuring the Print Server via
the Embedded Web Page
For more detailed information see the OkiLAN
Note:
User's Guide on the Drivers CD supplied with your
printer [Network Software → Installation/
Config → Dcumentation → Install User's Guide]
□
Activate your web browser (Netscape Navigator®
version 4.0 or higher, or Microsoft® Internet Explorer®
version 4.0 or higher), then enter the IP Address for the
printer (this will be found on the Network Information
configuration sheets generated when you press the Test
button on the back of the printer).
□
From this page you can
Enable/disable protocols.
•
Change the IP address, Subnet Mask and default
•
Gateway to meet the requirements for your
particular network environment.
□
When done, save and submit your changes to the print
server to make them permanent. When prompted, enter
the following:
User Name = Root.
•
Password = Last 6 digits of the MAC Address (this
•
will be found on the Network Information
configuration sheets generated when you press the
Test button on the back of the printer).
Install the Driver
If you are not using DHCP, you need to obtain an IP
Address from your network Administrator and enter it
using the front panel:
□
Press until you see
+
then press ENTER
□
Press until you see
+
□
Press + to change the setting to
ENTER , then BACK
□
Press to advance to the
+
□
Use and – to set each set of three digits in the IP
+
Address, pressing
next set of digits.
□
Press to engage the IP Address, then press
BACK
.
ON LINE
□
Insert the Drivers CD supplied with your printer in the
CD-ROM drive. The CD will autorun. (If it doesn't,
click Start → Run → Browse. Browse to your
CD-ROM drive, double-click Install.exe, click OK.)
□
The License Agreement appears, click Next.
□
Select your language.
□
The Menu Installer Software Installation window
appears. Click the Printer Driver Installer button.
□
The Local or network printer dialog box appears.
Select Network Printer, then click Next.
□
The Connection type dialog box appears. Select
Directly to the network... and click Next.
□
The TCP/IP Connection dialog box appears.
□
Follow the on-screen instructions to complete the
installation.
6
NOTE
on the display,
NETWORK MENU
.
. Press
IP ADDRESS SET
, and press
MANUAL
.
. Press
IP ADDRESS
in between to go to the
ENTER
(continued on next page)
.
ENTER
.
ENTER