Snow Chuteassembly; Headlight Assembly - Sears Craftsman C950-52943-0 Owner's Manual

ASSEMBLY
SNOW CHUTEASSEMBLY
NOTE: Thechuteringassembly (A,Figure10)comesinstalled on theunit
fromthefactory.
1. Turncrankassembly (Figure4) untilthearrowon outerring (B, Figure
10)of chuteringassembly pointsforward.
NOTE: Makesuretheslot in thechutering alignswith thearrowonthe
outerring.
2. Installchutedeflector ( C) usingfourscrews (D)and nuts(E)in holes
asshown.Thechutedeflector m ustpointforwardfor properinstalla-
tion.
3. Tightenscrews snuglybutbecarefulnotto over-tighten.
Snow Chute Assembly Figure 18
HEADLIGHT ASSEMBLY
Theheadlight i smounted on therightsideofthe upperhandle,itisin-
stalledupside-down for shippingpurposes,
1. Remove t he nut(A,Figure11) and Iockwasher (B)from thecarriage
bolt(C).
2. Turntheheadlight ( D)to thetop sideof theupperhandle(E).Ensure
external tooth Iockwasher (F)andsaddlewasher (G)arein placeas
shownin Figure11.
3. InstallthenutandIockwasher to secure theheadlight t o thehandle.
Theheadlightshouldpointtoward thesnowclearingpath.
Headlight Assembly Figure 11
14