To Replace Fuse; To Replace Headlight Bulb; Interlocks And Relays; To Remove Hood And Grill Assembly - Craftsman 917.254791 Owner's Manual

SERVICE AND ADJUSTMENTS
=
TO REPLACE FUSE (See Fig° 31)
Replace with 30 amp automotive-type p_ug_.tn fuse. The
fuse holder is located in the engine compartment, dtrectty
in front of the heat shleld,
FfG, 31
TO REPLACE HEADLIGHT BULB
Raise hood_
Puil butb holder out of the hole In the backside of the
grill,
Replace butb In holder and push bulb holder securely
back tnto the hole in the backside of the grill
= Close hood,
INTERLOCKS AND RELAYS
Loose or damaged wiring may cause your tractor to run
poorly, stop running, or prevent it from starting,
Check wiring See efectrical wiring diagram tn Repair
parts section of this manuel
TO REMOVE HOOD AND GRILL ASSEMBLY
(See Figs_ 32 and 33)
. Raise hood.
Unsnap headlight w_reoonnector.
Carefulty remove springsfrom hinge brackels.
Stand at side of tractor. Grasp hood, rift forward and
Hitoff hinge brackets.
To reinstall, slide hood pivot rod into slot in hinge
brackets, andcarefully reinsfall hoodspdngs
HOOD ,HEADLIGHT
HOOD SPRING
HINGE BRACKET
FIGs 32
HOOD PWOT ROD
HINGE BRACKET
FIG. 33
23