Getting To Know Your Scroll Saw - Craftsman 113.236090 Owner's Manual

,, Getting to Know Your Scroll Saw-_--.
11 _!Knob
10 Blade Guard/Hold-Down Knob
Holder
Frame
(Lift Here) 8 Btade Guard
Blade
Arm Bearings
2 Work Hold-Down Foot
and Btade Support
Speed Control
On/Off Knob
Lock Knob
___3 Bevel Scale Bevel
4 Indicator
_-'_ 9 Lower Blade Holder
t. Tension Knob - Tightening the
knob (clockwise) will increase the
tension on the blade. Loosening it
(counterclockwise) will decrease the
tension,
2. Work Hold-Down and Blade Sup-
port - Provides added control of
workpiece, protection for operator
and support for the blade,
3. Bevel Scale - Shows angle table is
tilted for bevel cutting.
4. Bevel Indicator - Points to the
approximate angle of the blade in
relation to the table top.
5, Table Bevel Lock Knob - When
tightened, this knob secures table at
desired bevel angle, Loosening
knob allows the table to tilt up to 45 °
for bevel cuts.
6. Speed Control/On-Off Knob - For
speed control setting, _efer to the
B_se
(LIft Here)
"Choice of Blade and Speed" table.
The On-Off knob has a tocking fea-
ture, This Feature Is Intended To
Help Prevent Unauthorized Use
By Children And Others. (See
more on next page.
7. Storage Drawer - For convenient
storage of pin and plain blades,
8. Blade Guard - Defines area of mov-
ing blade,
9. Blade Holders - Retain and posi-
tion the blade.
10. Blade Guard/Hold Down Knob -
Allows for secure angular position-
ing of blade guard, work hold down
and sawdust blower.
11. Height Adjustment Knob - Allows
for vertical positioning of item in
number t0.
iiill ,o