Epson Stylus NX510 Series Network Installation Manual page 32

EpsonNet Setup was unable to find my printer on the network
1. If you see a screen like this one, do one of the following:
■
If you connected the printer wirelessly, verify that the printer is turned on
and the green WiFi light on the printer's control panel is on. Select
setup using the printer's control panel
■
If you connected the printer to your network with an Ethernet network
cable, verify that the printer is turned on and connected to your network.
Select
■
If you created an Ad-Hoc wireless connection, do one of the following:
■
■
■
If you're switching from a wireless to a wired network connection, you
need to disable the wireless adapter using the printer's control panel. Press
the
F
Settings
Wireless LAN
2. Continue clicking
printer. Then continue with step 9 on page 25.
32
Troubleshooting
Wired Network (Ethernet) setup
For Windows users:
with an Ethernet cable, disconnect it. When setup is complete,
reconnect your computer's Ethernet cable.
For Macintosh users:
with an Ethernet cable, you cannot set up your printer this way. See
page 4 or page 22 to set up your printer.
button on the printer's control panel, select
Setup
>
Wireless LAN Setup
. Select
until EpsonNet Setup begins to search for your
Next
If your computer is connected to a network
If your computer is connected to a network
>
Advanced Setup
, then press
Yes OK
, then click
Next
, then click .
Next
Network
>
Disable
.
Wi-Fi
.