Epson Stylus NX510 Series Network Installation Manual page 12

Select WPA Security Settings
1. Use the arrow buttons on the printer's control panel to enter your WPA
passphrase. Press the
or numeric/special characters.
Important:
WPA passphrases are case-sensitive. Be sure to enter upper- or lowercase letters
as necessary.
■
Press
numeric/special (
■
Press u or d until you see the character you want.
■
Press l or r to move the cursor.
■
Press
2. When you're done entering the WPA passphrase, press
3. Continue with "Confirm Your Network Settings" on page 14.
12
Wireless Network Installation
Menu
x
Indicates current selection. Press the
button to switch between uppercase, lowercase,
or numeric/special characters.
From the printer's control panel:
Press u or d to select a character.
Press l or r to move the cursor.
Press – to delete a character.
Press OK when done.
to switch between uppercase (
Menu
x
) characters.
123
to delete a character.
–
button to switch between uppercase, lowercase,
x
Menu
), lowercase (
ABC
.
OK
), or
abc