Epson Stylus NX510 Series Network Installation Manual page 15

4. Wait for the printer to connect to your wireless network (this can take up to
90 seconds).
Once it's connected, you see a green
5. Continue with "Install Software" on page 23.
Note:
If the printer doesn't connect to your wireless network after 90 seconds, the SSID,
WEP key, or WPA passphrase may have been entered incorrectly. See "Connect
Wirelessly Using Advanced Setup" on page 8 to select your network settings again.
If the printer still doesn't connect to your wireless network, see "The printer cannot
find or connect to the wireless router or access point" on page 31.
light on the printer's control panel.
WiFi
WiFi light
Wireless Network Installation
15