Epson Stylus NX510 Series Network Installation Manual page 11

11. Press u or d to select the security mode that your wireless network is using,
then press
OK
Note:
If your wireless network doesn't have security enabled, select None, then
press OK.
12. Do one of the following:
■
If your wireless network uses WPA as the security mode, continue with
"Select WPA Security Settings" on page 12.
■
If your wireless network uses WEP as the security mode, continue with
"Select WEP Security Settings" on page 13.
■
If your wireless network doesn't have security enabled, continue with
"Confirm Your Network Settings" on page 14.
.
Wireless Network Installation
11