Figure 4.14 Sca2 Type 16-Bit Scsi Connector - Fujitsu MAT3300NC/NP Product/Maintenance Manual

(2) SCSI connector and power supply connector
The connector for the SCSI bus is an unshielded SCA-2 connector conforming to SCSI-3 type
which has two 40-pin rows spaced 1.27 mm (0.05 inch) apart. The power connector is included in
the SCSI connector.
Figure 4.14 shows the SCSI connector. See Section B.1 in Appendix B for signal assignments on
the connector.
For details on the physical/electrical requirements of the interface signals, refer to Sections 1.3 and
1.4 in SCSI Physical Interface Specifications.
(3) Connector for external operator panel
This connector is not available for NC model drives.
4-12

Figure 4.14 SCA2 type 16-bit SCSI connector

C141-E201