Problems And Solutions - Epson Stylus NX410 Series Quick Manual

LCD display screen message
The printer's ink pads are nearing
the end of their service life.
Contact Epson Support.
The printer's ink pads are at the
end of their service life. Contact
Epson Support.
Cannot recognize the memory
card or disk.

Problems and Solutions

Check the solutions below if you're having trouble using your Epson printer.
Printing and Copying Problems
■
Make sure your original is positioned in the front right corner of the scanner
glass. If the edges are cropped, move your original away from the edges
slightly.
■
Make sure your paper is loaded short edge first and is positioned against the
right side with the edge guide against its left side. Don't load paper above the
arrow mark inside the edge guide.
■
Make sure the paper size settings are correct for the paper you loaded.
Paper Feeding Problems
■
If paper doesn't feed, remove it from the sheet feeder. Flip through the stack to
separate the sheets a little. Then reload the paper against the right side, and
slide the left edge guide against the paper (but not too tightly).
■
Do not load too many sheets at once. You can load up to 120 sheets of letter-
size plain paper, 80 sheets of matte, or 20 sheets of photo paper. Load other
papers one sheet at a time. See your on-screen Epson Information Center for
more information.
38
Solving Problems
Problem and solution
Parts inside your Epson printer are at the end of
their service life. Contact Epson for help (see
page 40).
The memory card is not inserted correctly or
there is a problem with the card. Remove it and
check the card. Make sure the card is
compatible with your Epson printer (see
page 14).