Epson Stylus NX410 Series Start Here Manual
  1. Manuals
  2. Brands
  3. Epson Manuals
  4. All in One Printer
  5. Stylus NX410 Series
  6. Start here manual
Epson Stylus NX410 Series Start Here Manual

Epson Stylus NX410 Series Start Here Manual

Epson stylus multifunctional printer
Hide thumbs Also See for Stylus NX410 Series:
1
2
3
4
5
6
7
8
Table of Contents

Advertisement

Quick Links

See also: Quick Manual
Start Here
1
Unpack
(Included for Canada only)
If anything is missing, contact Epson as described on the back.
Note:
The model name of your product may vary slightly from the one shown above.
The included CD and documentation apply to all products in the series.
Caution:
Do not open ink cartridge packages until you are ready to install the ink.
Cartridges are vacuum packed to maintain reliability.
Canada only: For French speakers, remove stickers from the backing sheet and place
over corresponding text on the control panel.
Remove all protective materials.
2
Turn on the printer
1
Connect the power cable.
Caution:
2
Press the
Note:
*411615700*
*411615700*
Do not connect to your computer yet.
On button.
You can raise the LCD display screen for better viewing, if necessary.
Series

Advertisement

Table of Contents
loading

Related Manuals for Epson Stylus NX410 Series

Summary of Contents for Epson Stylus NX410 Series

  • Page 1 Start Here Unpack (Included for Canada only) If anything is missing, contact Epson as described on the back. Note: The model name of your product may vary slightly from the one shown above. The included CD and documentation apply to all products in the series.

  • Page 2: Select Your Language

    Select your language Press to select to select your language, then press OK. Language Install ink cartridges Note: Do not load paper yet. Lift up the scanner, then open the cartridge cover. Shake the ink cartridges gently 4 or 5 times, then unpack them. Remove only the yellow tape from each cartridge.

  • Page 3: Load Paper

    Press each cartridge down until it clicks. Close the cartridge cover. Press down until it clicks. Lower the scanner. Press the OK button to charge the ink. Charging takes about 2 minutes. Note: Your printer ships with full cartridges and part of the ink from the first cartridges is used for priming the printer.
  • Page 4 Flip the feeder guard forward, then squeeze the edge guide and slide it left. Load paper against the right edge and behind the tab, with the printable side face up. 8½ Note: Don’t load the paper sideways; always load it short edge first. Slide the edge guide over.

  • Page 5: Install Software

    Cancel screen, click USB cable. You can’t install your software that way. Insert the Epson Stylus NX410 Series software With Windows Vista, if you see the AutoPlay window, click Run SETUP.EXE. When you see the User Account Control screen, click Continue.
  • Page 6 ® Make sure the printer is NOT CONNECTED to your computer. Insert the Epson Stylus NX410 Series software CD. Double-click the Click Install and follow the on-screen instructions. When prompted, connect a USB cable. Use any open USB port on your Macintosh.

  • Page 7: Control Panel

    Internet Support Visit Epson’s support website at epson.com/support and select your product for solutions to common problems. You can download drivers and documentation, get FAQs and troubleshooting advice, or e-mail Epson with your questions. Speak to a Support Representative Call (562) 276-4382 (U.S.) or (905) 709-3839 (Canada), 6 Time, Monday through Friday.

  • Page 8: Need Paper And Ink

    DURABrite is a registered trademark of Epson America, Inc. General Notice: Other product names used herein are for identification purposes only and may be trademarks of their respective owners. Epson disclaims any and all rights in those marks. This information is subject to change without notice.

This manual is also suitable for:

Nx415 - stylus color inkjet

Table of Contents