Selecting Individual Photos For Printing - Epson Stylus NX410 Series Quick Manual

When you want to remove the card, make sure the memory card access light is not
flashing, then pull the card straight out of its slot. If your printer is connected to
your computer, first prepare the card for removal:
■
If the computer is running Windows
bar and select
confirmation message, remove the card.
■
If your computer is a Macintosh
desktop into the trash. Then remove the card.
Caution:
Do not remove the card or turn off your Epson printer while the memory card access
light is flashing; you may lose data on the card.

Selecting Individual Photos for Printing

You can select individual photos for printing as you view them on the LCD
display screen.
1. Press the
2. Press
OK
3. Press l or r to move through your photos and
display one that you want to print.
4. Press the
copies you want of that photo.
5. If you want to crop your photo and enlarge the resulting image area to fit onto
your paper, press
■
To resize the image area, press
■
To move the image area, use the arrow buttons.
■
To check the zoomed/cropped image, press
■
To rotate the image area, press
After you finish cropping your photo, press
6. Repeat steps 3 through 5 to select more photos, if you want.
7. To change any of the print settings displayed on the screen, press
select your settings (see page 20). When you're done, press
16
Printing From a Memory Card
Safely remove USB Mass Storage Device
button. You see this screen:
Memory Card
to select
View and Print Photos
or button to select the number of
+ –
Display/Crop
®
, click the
®
, drag the removable disk icon from your
.
.
or .
+ –
OK
.
Menu
.
OK
or icon on the task
. Once you see a
.
Menu
.
OK
and