Error Indicators - Epson Stylus NX410 Series Quick Manual

Error Indicators

Follow the instructions on the display screen to solve most common problems.
If you see one of the error messages below, follow the steps here to proceed.
LCD display screen message
Press the button to replace
OK
the cartridges.
Paper jam. Open the scanner unit
and remove the paper.
Press the Start button to eject the
paper inside. See your
documentation.
Paper is jammed in the printer.
Turn off the printer, open the
scanner unit, remove paper. See
your documentation.
No photos could be recognized.
Make sure photos are positioned
correctly. See your manual.
A printer error has occurred. Turn
off the printer and turn it on again.
Please see your documentation.
A scanner error has occurred. See
your documentation.
Problem and solution
Replace the expended ink cartridges (see
page 33).
If you just replaced a cartridge and the message
still appears, the cartridge is not installed
correctly. Press the
cartridges to the replacement position. Press
down on all the installed cartridges, then press
the button again to continue.
OK
Paper is jammed. Carefully remove the jam (see
page 38).
Make sure your photo is placed correctly on the
scanner glass (see page 9).
Turn your Epson printer off, make sure no paper
is jammed inside (see page 38), and turn it back
on. If the error is not resolved, contact Epson for
help (see page 40).
Turn your Epson printer off and then back on. If
the error is not resolved, contact Epson for help
(see page 40).
button to move the
OK
Error Indicators
37