Oki B710dn Setup Manual page 7

When handling the drum-toner cartridge, take note of
the following points:
WARNING!
Never throw a drum-toner cartridge into
an open flame as it can cause an
explosion.
• Do not subject the drum-toner cartridge to direct
sunlight or strong light.
• When installing the drum-toner cartridge, select a
location not subject to strong light and try to finish
the installation within 5 minutes.
• Do not touch the surface of the photosensitive
drum. Do not let the drum-toner cartridge stand
upside down or place it upside down as this may
damage the drum.
• A drum shutter protects the photosensitive drum
from light. Do not open the drum shutter.
• Although the toner is not harmful to the body, wash
it off immediately with cold water if your hands or
clothes are in contact with it.
• It is recommended to use up the drum-toner
cartridge within one year of removing it from its
packaging.
• Keep the drum-toner cartridge out of the reach of
children.
1. Open the cover.
When the optional offset catch tray is installed,
fold the tray first before opening the cover.
WARNING!
Do not touch any parts inside the printer.
NOTE
2. Take the drum-toner cartridge out of the
packaging box and shake it seven or eight times as
shown in the diagram.
3. Place the drum-toner cartridge on a flat surface
and pull out the seal horizontally.
When pulling out the seal, pull it out
horizontally. The tape might break if it is
pulled out diagonally.
After the seal has been pulled out, do not
shake or bump the drum-toner cartridge.
4. Hold the drum-toner cartridge by the grip and
insert it into the slot inside the printer.
Ensure that the drum-toner cartridge is
firmly located.
5. Close the cover securely.
If the offset catch tray is folded as in Step 1,
close the cover and then return the tray to its
original position.
7 / English
CAUTION!
CAUTION!
NOTE