Install Ink Cartridges - Epson Stylus NX300 Series Start Here Manual

Select your country:
1 Press or
then press OK.
2 Press or
then press OK.
3 If you change the region, confirm your
selection at next screen by pressing the
1 key (for yes) on the numeric keypad.
Enter the date and time:
1 Press or
2 Press or
region uses Daylight Saving Time and
it's currently in effect. (DST is effective
from spring to summer.) Otherwise select
Winter to turn off the setting.
3 Press OK.
4 Press or
5 Press or
date display, then press OK.
6 Use the numeric keypad to change
the date, then press OK.
7 Press or
display, then press OK.
8 Use the numeric keypad to set the time.
9 If you selected 12h, Press
select AM or PM.
10 Press OK.
When you're finished choosing your settings, press Menu to exit.
4

Install ink cartridges

Note: Don't load paper before installing the ink cartridges.
1
Open the scanner.
2
Open the cartridge cover.
3
Shake the ink cartridges,
then unpack them.
4
Remove only the yellow tape from each
cartridge.
Caution: Don't remove any other
seals from the cartridges.
to select Country/Region,
to select your Region,
to select Daylight Saving Time, then press OK.
to select Summer, if your
to select Date/Time, then press OK.
to select the type of
to select a 12-hour or 24-hour
or to