Epson Stylus NX300 Series Start Here

Epson Stylus
®
Start Here
Read these instructions before using your product.
1
Unpack
Power cord
Caution: Do not open the ink cartridge package until you are ready to
install the ink. Cartridges are vacuum packed to maintain reliability.
Remove all protective materials.
2
Turn on
1
Connect the power cable.
Caution: Do not connect to your computer yet.
2
Press the On button.
*411852500*
*411852500*
NX300/305 Series
USB cable
3
Make settings
/Fax
1
to select your language, then press OK.
Press or
2
Press or to select your country or region, then press
OK.
3
to select Summer if your region uses Daylight
Press or
Saving Time and it's currently in effect. (DST is effective from
spring through summer.) Otherwise select Winter to turn off
the setting.
4
Press OK.
5
Press or to select the date format, then press OK.
6
Use the numeric keypad to change the date, then press OK.
7
Press or to select a 12-hour or 24-hour time format,
then press OK.
8
Use the numeric keypad to set the time.
If you chose a 12-hour time format, press
AM or PM.
9
Press OK.
4
Install ink cartridges
1
Lift up the scanner.
2
Open the cartridge cover.
Stop/
Clear Settings
B W
&
Color
or to select