Advanced Options - Lexmark Multifunction Laser Manual

•
Magazine—Use when the original document is from a magazine.
• Newspaper—Use when the original document is from a newspaper.
•
Press—Use when the original document was printed using a printing press.
•
Other—Use when the original document was printed using an alternate or unknown printer.
Collate
This option keeps the pages of a print job stacked in sequence when printing multiple copies of the document. The factory default
setting for Collate is on; the output pages of your copies will be ordered (1,2,3) (1,2,3) (1,2,3). If you want all the copies of each
page to remain together, turn Collate off, and your copies will be ordered (1,1,1) (2,2,2) (3,3,3).
Color
This option enables or disables color for the scanned image.

Advanced Options

Touching the Advanced Options button opens a screen where you can change the following settings:
•
Advanced Duplex—Use to specify the document orientation, whether documents are one-sided or two-sided, and how
documents are bound.
Note: Some Advanced Duplex options are available only on select printers.
•
Advanced Imaging—Use to change or adjust Auto Center, Background Removal, Color Balance, Color Dropout, Contrast,
Mirror Image, Negative Image, Scan Edge to Edge, Shadow Detail, Sharpness, and Temperature settings before you copy the
document.
•
Create Booklet—Use to create a booklet. You can choose between 1-sided and 2-sided.
Note: This option appears only when a print duplexer and printer hard disk are installed.
•
Cover Page Setup—Use to set copy cover page and booklet cover page.
•
Custom Job—Use to combine multiple scanning jobs into a single job.
• Edge Erase—Use to eliminate smudges or information around the edges of a document. You can choose to eliminate an equal
area around all four sides of the paper, or pick a particular edge. Edge Erase will erase whatever is within the area selected,
leaving nothing on that portion of the scan.
• Header/Footer—Use to turn on Date/Time, Page number, Bates number, or Custom text, and prints them in the specified
header or footer location.
•
Margin Shift—Use to increase the size of the margin of a specified distance by shifting the scanned image. This can be useful
in providing space to bind or hole-punch copies. Use the increase or decrease arrows to set how much of a margin you want.
If the additional margin is too large, then the copy will be cropped.
•
Overlay—Use to create a watermark (or message) that overlays the content of your copy. You can choose from Urgent,
Confidential, Copy, and Draft, or you can enter a custom message in the "Enter custom text" field. The word you pick will
appear, faintly, in large print across each page.
Note: A custom overlay can also be created by your system support person. When a custom overlay is created, a button
with an icon of that overlay will be available.
• Paper Saver—Use to print two or more sheets of an original document together on the same page. Paper Saver is also called
N-up printing. The N stands for Number. For example, 2-up would print two pages of your document on a single page, and
4-up would print four pages of your document on a single page. Touching Print Page Borders adds or removes the outline
border surrounding the original document pages on the output page.
• Separator Sheets—Use to place a blank piece of paper between copies, pages, or print jobs. The separator sheets can be
drawn from a tray that contains a type or color of paper that is different from the paper your copies are printed on.
Copy guide
Page 3 of 4