Lexmark Multifunction Laser Manual

Copy guide

Making a quick copy

1
Load an original document faceup, short edge first into the ADF or facedown on the scanner glass.
Note: Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings)
into the ADF. Place these items on the scanner glass.
2
Adjust the paper guides when loading a document into the ADF.
Note: Make sure the size of the original document and the copy paper size are the same. Failure to set the proper size may
result to a cropped image.
3
From the printer control panel, press

Copying using the ADF

1
Load an original document faceup, short edge first into the ADF.
Note: Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings)
into the ADF. Place these items on the scanner glass.
2
Adjust the paper guides.
3
From the home screen, navigate to:
Copy > change the copy settings > Copy It

Copying using the scanner glass

1
Place an original document facedown on the scanner glass in the upper left corner.
2
From the home screen, navigate to:
Copy > change the copy settings > Copy It
3
If you have more pages to scan, then place the next document on the scanner glass, and then touch Scan the Next Page.
4
Touch Finish the Job to return to the home screen.

Copying film photos

1
Place a photo facedown on the upper left corner of the scanner glass.
2
From the home screen, navigate to:
Copy > Content > Photo >

Understanding the copy screens and options

Copy from
This option opens a screen where you can enter the size of the documents you are going to copy.
•
Touch a paper size button to select it as the "Copy from" setting. The copy screen appears with the new setting displayed.
• When "Copy from" is set to Mixed Sizes, you can copy an original document that contains mixed paper sizes.
to start copying.
> Photo/Film > > Copy It > Scan the Next Page or Finish the Job
Copy guide
Page 1 of 4