Lexmark MS810 Quick Reference page 5

Supported flash drives and file types
Flash drive
• Lexar JumpDrive 2.0 Pro (256MB, 512MB, or 1GB
sizes)
• SanDisk Cruzer Mini (256MB, 512MB, or 1GB sizes)
Notes:
•
Hi‑speed USB flash drives must support the
full‑speed standard. Low-speed USB devices are
not supported.
• USB flash drives must support the File Allocation
Table (FAT) system. Devices formatted with New
Technology File System (NTFS) or any other file
system are not supported.
Printing from a flash drive
Notes:
• Before printing an encrypted PDF file, you will be prompted to
type the file password from the printer control panel.
•
You cannot print files for which you do not have printing
permissions.
1
Insert a flash drive into the USB port.
Notes:
• A flash drive icon appears on the printer home screen when
a flash drive is inserted.
•
If you insert the flash drive when the printer requires
attention, such as when a jam has occurred, then the printer
ignores the flash drive.
•
If you insert the flash drive while the printer is processing
other print jobs, then Busy appears. After these print jobs
are processed, you may need to view the held jobs list to
print documents from the flash drive.
Warning—Potential Damage: Do not touch the printer or the
flash drive in the area shown while actively printing, reading, or
writing from the memory device. Loss of data can occur.
File type
Documents:
• .pdf
• .xps
•
.html
Images:
• .dcx
•
.gif
• .JPEG
or .jpg
• .bmp
• .pcx
•
.TIFF
or .tif
•
.png
2
From the printer control panel, touch the document you want to
print.
3
Touch the arrows to specify the number of copies for printing, and
then touch Print.
Notes:
• Do not remove the flash drive from the USB port until the
document has finished printing.
•
If you leave the flash drive in the printer after leaving the
initial USB menu screen, then touch Held Jobs on the home
screen to print files from the flash drive.
Canceling a print job from the printer control
panel
1
From the printer control panel, touch Cancel Jobs or press
on the keypad.
2 Touch the print job you want to cancel, and then touch Delete
Selected Jobs.
Linking and unlinking trays
1
Open a Web browser, and then type the printer IP address in the
address field.
5
Notes:
• View the printer IP address on the printer home screen. The
IP address appears as four sets of numbers separated by
periods, such as 123.123.123.123.
• If you are using a proxy server, then temporarily disable it to
load the Web page correctly.
2
Click Settings > Paper Menu.
3
Change the paper size and type settings for the trays you are linking.
•
To link trays, make sure the paper size and type for the tray
match that of the other tray.
• To unlink trays, make sure the paper size or type for the tray
does not match that of the other tray.
4
Click Submit.
Note: You can also change the paper size and type settings using the
printer control panel. For more information, see "Setting the paper
size and type" on page 4.
Warning—Potential Damage: Paper loaded in the tray should match
the paper type name assigned in the printer. The temperature of the
fuser varies according to the specified paper type. Printing issues
may occur if settings are not properly configured.