Lexmark MS810 Quick Reference page 25

3
Insert the tray.
4 Do either of the following to clear the message and continue
printing:
• For touch‑screen printer models, touch
• For non‑touch‑screen printer models, select Next >
Clear the jam, press OK > .
[x]‑page jam, clear manual feeder. [250]
1
From the multipurpose feeder, firmly grasp the jammed paper on
each side, and then gently pull it out.
Note: Make sure all paper fragments are removed.
2
Flex the sheets of paper back and forth to loosen them. Do not fold
or crease the paper. Straighten the edges on a level surface.
3
Reload paper into the multipurpose feeder.
4
Slide the paper guide until it lightly rests against the edge of the
paper.
or Done.
>
25
5
Do either of the following to clear the message and continue
printing:
• For touch‑screen printer models, touch
•
For non‑touch‑screen printer models, select Next >
Clear the jam, press OK > .
[x]‑page jam, remove paper, open stapler
door. Leave paper in bin. [455–457]
1 From the stapler bin, firmly grasp the jammed paper on each side,
and then gently pull it out.
Note: Make sure all paper fragments are removed.
or Done.
>