Understanding Jam Messages And Locations - Lexmark MS810 Quick Reference

Allow the paper to enter the optional mailbox bins
properly
• Make sure to adjust the bin extender so that the paper size
indicators match the size of the paper used.
Notes:
–
If the bin extender is shorter than the size of the paper you
are printing on, then the paper causes a jam in the mailbox
bin. For example, if you are printing on a legal-size paper and
the bin extender is set to letter-size, then a jam occurs.
– If the bin extender is longer than the size of the paper you
are printing on, then the edges become uneven and the
paper is not stacked properly. For example, if you are
printing on a letter-size paper and the bin extender is set to
legal-size, then the paper does not stack properly.
• If paper needs to be returned to the mailbox bin, then insert the
paper under the bin arm, and then push the paper all the way back.
2
1
Note: If the paper is not under the bin arm, then a jam occurs
due to an overfilled bin.
Use recommended paper
•
Use only recommended paper or specialty media.
•
Do not load wrinkled, creased, damp, bent, or curled paper.
•
Flex and straighten paper before loading it.
• Do not use paper that has been cut or trimmed by hand.
• Do not mix paper sizes, weights, or types in the same tray.
• Make sure the paper size and type are set correctly on the computer
or printer control panel.
•
Store paper per manufacturer recommendations.
Understanding jam messages and
locations
When a jam occurs, a message indicating the jam location and
information to clear the jam appears on the printer display. Open the
doors, covers, and trays indicated on the display to remove the jam.
Notes:
• When Jam Assist is set to On, Discarding pages appears
on the display and the printer flushes blank or pages with partial
prints to the standard bin after a jammed page is cleared. Check
your printed output for blank pages.
•
When Jam Recovery is set to On or Auto, the printer reprints
jammed pages. However, the Auto setting reprints jammed
pages if adequate printer memory is available.
20
11
10
9
Jam location Printer message What to do
1 Staple finisher [x]‑page jam, Remove paper from
remove paper, open the stapler bin, open
stapler door. Leave the stapler door, then
paper in bin. [455– remove the staple
457] cartridge, and then
remove the jammed
staples.
2 Standard bin [x]‑page jam, Remove jammed
remove standard bin paper from the
jam. [203] standard bin.
1
2
3
4
5
6
7
8