Changing Admin Lan Subnets; Changing Wwn Settings For Eternus Sf Storage Cruiser Integration; Changing Settings For The Hba Address Rename Setup Service - Fujitsu ServerView Respurce Orchestrator Virtual Edition V3.1.0 User Manual

9.1.11 Changing Admin LAN Subnets

Use the following procedure to change an admin LAN subnet.
1.
From the ROR console menu, select [Settings]-[Admin LAN Subnet].
The [Admin LAN Subnet] dialog is displayed.
2.
Select the subnet to change.
The [Change Admin LAN Subnet] dialog is displayed.
3.
In the [Change Admin LAN Subnet] dialog, set the following items.
Subnet name
Enter a character string beginning with an alphabetic character and containing up to 16 alphanumeric characters, underscores
("_"), hyphens ("-"), and periods (".").
Network address
Enter valid values for the network address.
Subnet mask
Enter valid values for the subnet mask.
Gateway
Enter the settings for the gateway used for communication with the admin server on the admin LAN.
4.
Click <Change>.
5.
Click <OK>.
Note
When changing the information for a subnet other than the one the admin server belongs to, if there is even 1 managed server belonging
to the target subnet, the "Network address" and "Subnet mask" cannot be changed.
When changing the "Network address" or "Subnet mask", refer to the
to Different Subnets".
Modification Procedure when there are Managed Servers Belonging to Different Subnets
When there are managed servers in the target subnet, change the network address or the subnet mask using the following procedure.
1.
Register the subnet information using the new network address or subnet mask.
2.
Use the following procedure to change the admin LAN IP addresses of all managed servers belonging to the subnet before
modification.
For details on how to configure these settings, refer to
3.
Delete the subnet used before modification.

9.1.12 Changing WWN Settings for ETERNUS SF Storage Cruiser Integration

This section explains how to change WWN settings for integration with ETERNUS SF Storage Cruiser.
The WWN settings for ETERNUS SF Storage Cruiser integration can be changed by reconfiguring them.
Refer to "10.1 Configuring WWN Settings for ETERNUS SF Storage Cruiser

9.2 Changing Settings for the HBA address rename Setup Service

This section explains how to change settings for the HBA address rename setup service. Such settings include the admin server IP address,
the port used to communicate with the admin server, and the IP address of the HBA address rename server.
"Modification Procedure when there are Managed Servers Belonging
"9.1.3 Changing Admin IP Addresses".
Integration" for details on how to configure these settings.
- 74 -