Deleting; Network Parameter Auto-Configuration For Cloning Images - Fujitsu ServerView Respurce Orchestrator Virtual Edition V3.1.0 User Manual

In the ROR console, select the [Image List] tab.
A list of cloning images is displayed under the cloning image list.
Use this list to manage the cloning images used by Resource Orchestrator.
Figure 17.1 Cloning Image List
For details on the "Cloning Image List", refer to

17.5 Deleting

This section explains how to delete a cloning image.
Use the following procedure to delete cloning images:
1.
In the ROR console, select the [Image List] tab.
A list of cloning images is displayed under the cloning image list.
2.
In this list, right-click the name of the cloning image to delete and select [Delete] from the popup menu.
The confirmation dialog is displayed.
3.
Click <OK>.
The selected cloning image is deleted.
Note
While the cloning image is being deleted, no operations can be performed on other versions of the same cloning image (images that share
the same image name).

17.6 Network Parameter Auto-Configuration for Cloning Images

This section explains the network parameter auto-configuration function for cloning images.
Defining public LAN network parameters for each managed server before collecting cloning images enables automatic configuration of
the cloned servers' public LAN network interfaces when later deploying those cloning images.
This speeds up the deployment of multiple managed servers, as public LAN IP addresses no longer need to be manually and separately
configured on each cloned server.
To use this feature, the following settings must first be defined:
-
When not Using LAN Redundancy
-
IP address
-
Subnet mask
"A.8 [Image List] Tab".
- 137 -