Using The Showlogs Command - Fujitsu SPARC Enterprise M3000 Installation Manual

Example of showhardconf -u command execution
XSCF> showhardconf -u
SPARC Enterprise M3000; Memory_Size:8 GB;
XSCF>
B.3.2

Using the showlogs Command

The showlogs command displays the contents of the specified log in order of
timestamp. The displayed contents begin from the oldest date. The showlogs
command displays the following logs:
Error log
■
Power log
■
Event log
■
Temperature and humidity record
■
Monitoring message log
■
Console message log
■
Panic message log
■
IPL message log
■
+-----------------------------------+------------+
| FRU
+-----------------------------------+------------+
| MBU_A
| CPU
| Freq:2.520 GHz;
| MEM
| Type:1A; Size:1 GB;
| OPNL
| PSU
| FANBP_B
| FAN_A
+-----------------------------------+------------+
| Quantity |
| 1 |
| ( 1) |
| ( 1) |
| 8 |
| ( 8) |
| 1 |
| 2 |
| 1 |
| 2 |
Appendix B Troubleshooting B-7