E Priority - FujiFilm FINEPIX Z1000EXR Owner's Manual

Table of Contents

Advanced Anti Blur

When n is displayed, the camera will take a series of exposures and combine them

to form a single image, reducing "noise" (mottling) and blur. Pictures taken using this

process are indicated by a T icon during playback.

R n is available when ON is selected in the shooting menu (P 91) and the fl ash

(P 41) is off or set to auto.

Q Some time may be required to combine the exposures into a single image. A

single combined image may not be created if the subject or camera moves dur-

ing shooting. Keep the camera steady during shooting and do not move the

camera until shooting is complete.

Q Frame coverage is reduced.

The E Icon

When the shutter button is pressed halfway, the camera chooses the pre-

ferred

mode:

• S

(RESOLUTION PRIORITY): Produces crisp, clear shots.

• T

(HIGH ISO & LOW NOISE): Reduces noise in pictures taken at high sensitivities.

• U

(D-RANGE PRIORITY): Increases the amount of detail visible in highlights.

■ E Priority

Select this mode to manually choose from the following

• S

(RESOLUTION PRIORITY): Choose for crisp, clear shots.

• T

(HIGH ISO & LOW NOISE): Reduce noise in pictures taken at high sensitivities.

• U

(D-RANGE PRIORITY): Increase the amount of detail visible in highlights.

DYNAMIC RANGE (P 88) can be set to Z (1600%) and